Print settings
| Setting | Value |
|---|---|
| Nozzle temperature | 185–215°C |
| Heated bed | 0–45°C |
| Recommended print speed | 40–250 mm/s |
| Cooling fan | Up to 100% |
| Enclosure | Not required |
| Filament dryer | No |
| Ruby or hardened nozzle | Not required |
| Bed adhesive |
Not required (to improve adhesion or prevent curling you can use Landu Dimafix, 3DLac or Magigoo). |
Material properties
- made from biodegradable raw materials
- good mechanical properties (high hardness and tensile strength)
- user-friendly
- attractive surface finish
- well suited for high-resolution prints
- high stiffness of printed parts
- relatively low melting point
- no shrinkage after cooling
- suitable for processes such as lost casting to make metal parts
- wide colour range
- heat deflection temperature (HDT) – 55°C
Product title
Vendor
20 kr | 25 kr
Product title
Vendor
20 kr | 25 kr
Product title
Vendor
20 kr | 25 kr
Product title
Vendor