Sort + Filter
A wood-coloured filament that changes colour, which makes what is printed look more like real timber
Print settings for LANDU Dual Color Wood PLA
If you are using LANDU Dual Color Wood PLA (dual-colour PLA with a wood finish), the manufacturer has not published official print settings. Based on the recommended settings for LANDU PLA and wood-fibre PLA, the following settings are a good starting point:
| Setting | Recommended value |
|---|---|
| Nozzle temperature | 205–220°C (start at 210°C) |
| Bed temperature | 50–60°C (55°C is a good starting point) |
| Print speed | 30–50 mm/s |
| First layer speed | 15–20 mm/s |
| Cooling fan | 100% after the first 2–3 layers |
| Layer height | 0.20 mm (0.28 mm for faster printing) |
| Nozzle | 0.4 mm minimum (0.6 mm is better) |
Retraction
-
Direct Drive extruder: 0.8–1.5 mm
-
Bowden extruder: 3.5–5 mm
-
Retraction speed: 30–40 mm/s
Drying
If the filament has absorbed moisture:
-
50–55°C for 4–6 hours before printing.
For the best dual-colour effect
Since this is a dual-colour filament:
-
Print objects with curved or multi-faceted surfaces.
-
Rotate the model so that both colours of the filament are clearly visible.
-
Keep the outer wall speed constant to prevent the filament from twisting, as this can change how the colours appear.
If you use a Bambu Lab printer
A good starting profile is:
-
Material: Generic PLA
-
Nozzle temperature: 210°C
-
Bed temperature: 55°C
-
Outer wall speed: 40–60 mm/s
-
Print mode: Silent or Standard for the best-looking finish.